Course Overview The following training provides instruction on how to perform installation and service for the CS-7 One Shot Stitching system using narrated multimedia video instruction and written instruction. Course Objective Provide the necessary knowledge for the learner to be able to perform installation and service for the CS-7 One Shot Stitching system. This self-paced […]
With the introduction of stand firmware version 37 and higher, the calibration that is performed for position settings of motors M1-M5 has changed. This training will outline the new procedure. Course Objective Provide the necessary knowledge for the learner to be able to perform the calibration procedure. Setting the degree positions for M1 and M5 […]
The FPD (Flat Panel Detector) Maintenance Tool is a standalone application as a single executable file that communicates directly to an AeroDR detector for service purposes such as pulling log files from a detector, clearing an error or learning the unique SUBID of the Cable or Cradle that the detector is connected to – among other […]
Course Overview The purpose of this training is to familiarize the learner with the new features and changes introduced with the release of DI-X1 V1.31 for the DI-X1 DDR Workstation. Course Objective Familiarize the learner with the new features and changes introduced with the release of DI-X1 V1.31 for the DI-X1 DDR Workstation. Course Contents […]
Course Overview The registration key is a device that will allow the user to wirelessly add a detector to a CS-7 without the use of a connected docking station. In this brief training the learner will get a better understanding how to configure the registration key. Course Objective Provide the necessary knowledge for the learner […]
Course Overview The following training provides instruction on how to install and configure R3 Remote Maintenance software on an Ultra computer using narrated multimedia video instruction. R3 software provides easy installation and configuration of the customer device for Konica Minolta-whitelisted TeamViewer Host (or TeamViewer QuickSupport) to facilitate remote service. R3 installation on Ultra is also necessary […]
Course Overview In this brief training the learner will get a better understanding how to install the Windows update patches using the new method. This is in response to the new change implemented by KM Japan. This procedure applies to Bio-Med or dealer trained individuals. Course Objective Provide the necessary knowledge for the learner to […]
Course Overview This course is designed to support the FW update procedure for the Aruba line of access points. This is in response to the release of TI702-0146. Course Objective Provide the necessary knowledge for the learner to be able to complete the firmware update of the access point.. Course Contents Backup AP Perform FW […]
Course Overview This training course provides instruction on how to perform the stand calibration on the KDR Flex OTC. Course Objective Provide the necessary knowledge for the learner to be able to complete the calibration at install or PM. Course Contents OTC Alpha Angle Servo Assistance Sensors OTC Beta Angle OTC Longitudinal Axis OTC Transversal […]
Course Overview The following training provides instruction on how to configure the Ultra application for DICOM Modality Worklist (MWL) and PACS (DICOM STORE). Course Objective This mini training course will review how to configure the Ultra acquisition software for DICOM Modality Worklist (RIS) and for sending to PACS (DICOM Store). This is not a complete […]
Global